Hornady Lock-N-Load Classic Press User Manual download pdf (Page 8)

- 8 - - 9 -

Place a lubricated case in

the shell holder and pull the

operating handle.

As the ram moves upward, you will see

the PPS primer arm pivot forward to

allow the decapped primer to deﬂect off

the arm into the primer catcher. As the

primer arm pivots, it moves into position

to pick up a new primer. If you are not

using the automatic primer feed, a

primer should be inserted by hand at the

top of the ram stroke.

With a primer in the cup, return

the handle to the rest position.

As the ram moves downward, the PPS

primer arm pivots back into position

under the decapped case and is

held in position by the ram and the

frame casting. As the ram continues

downward, the case is brought down

over the primer cup and the primer is

seated. Use care at this stage to feel

the primer “seat” correctly without

being crushed. Release pressure on the

operating handle and raise it slightly

to allow removal of the primed case.

Then insert another case and repeat the

operation.

7

7

6

6

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments