Hornady Lock-N-Load Classic Press User Manual download pdf (Page 7)

- 6 - - 7 -

Install primer arm into ram.

NOTE: Screw the proper seater punch/

cup for the type of primer you are using

into the arm before placing in ram. If

you are using the automatic primer

feed, it will be necessary to adjust the

feed body. The ram should be at the

top of the stroke. Adjust the primer

feed body so the primer retainer spring

is deﬂected by the primer cup (on

the primer arm) far enough to allow a

primer to drop (see APF instruction). Do

not overtighten the adjusting screw. It

should be tight enough to hold the unit

in place, but still allow the body to move

to prevent a primer from being caught

or crushed. REMEMBER, primers are

explosives – do not try to force a primer

in a case. If for some reason the Positive

Priming System (PPS) does not work

properly, stop to see why. Never try to

force the operation.

Clean, inspect and lubricate all

cases before resizing.

Using a case lube pad or Hornady

®

One

Shot

®

Case Lube, it is easy to lubricate

the body portion of the bottle neck

cases. A minimum of lubricant should be

used on the neck portion since trapped

lubricant may cause the shoulder to

buckle. Very little or no lubricant may

easily result in a stuck case.

5

4

5

4

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments