Hornady Lock-N-Load Control Panel User Manual download pdf (Page 3)

SETUP AND OPERATION

CONTROL PANEL SETUP (Deluxe & Standard models)

1) Align wire harness with

connector on back of the

Control Panel. Firmly press wire

harness into Control Panel while

supporting Control Panel.

2) Slide Control Panel Mounting

Bracket onto the Case

Feeder Tube.

3) Place Thumbscrew through

Control Panel Mounting Bracket

and tighten Thumbscrew.

NOTE: Do not overtighten

thumbscrew.

4) Plug 12V power supply into input

power jack on the wire harness.

OPERATION

• Press and hold POWER button to

power on the Control Panel.

• Press and hold POWER

button for 6 seconds to power

off the Control Panel.

• Press the POWER button

momentarily to reset the counter.

• Press MUTE button to silence

audible alarm (green light = un-

muted, and red light = muted).

NOTE: When the Control Panel is muted, the sensor lights will still turn from

green to red when a sensor is activated, but no audible alarm will be heard.

12V Output

Power

Jack

12V Output

Power

Jack

12V Input

Power Jack

Primer Slide Detect

Cycle Counter

Powder

Charge

Powder

Level

Primer

Level

Control Panel

Connector

WIRE HARNESS

REFERENCE VIEW

(not to scale)

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Hornady Lock-N-Load Control Panel User Manual Page 3

Comments to this Manuals

Related products and manuals for Hardware Hornady Lock-N-Load Control Panel