Hornady Lock-N-Load Light Strip User Manual download pdf (Page 1)

Lock-N-Load

Light Strip

Mounting Instructions

1.) The Hornady

Lock-N-Load

Light Strip

can be mounted to most smooth, clean

surfaces. Before mounting, place light strip

in desired location to check ﬁt and operation

of press, as well as cord length. To prevent

damage to the light and cord, no moving part of

the press or equipment should come in contact

with the light or cord.

2.) To mount light, clean surface where light

strip is to be mounted with a non-residue

forming cleaner such as rubbing alcohol or

similar cleaner. Cleaning solution should be

tested with surface to ensure it will not harm

surface.

3.) Remove paper backing and ﬁrmly press one

end of light strip onto surface. While moving

down the light, ﬁrmly press light against

surface to ensure proper adhesion.

4.) Route the light cord around the press

avoiding moving components. On the Hornady

Lock-N-Load

AP Press, the cord will ﬁt under

the catch bin bracket on the left side of

the press.

5.) Plug light into supplied power supply.

Lock-N-Load® Light Strip Mounting Instructions1.) The Hornady® Lock-N-Load® Light Strip can be mounted to most smooth, clean surfaces. Before mounti

No comments

Hornady Lock-N-Load Light Strip User Manual Page 1