Hornady Lock-N-Load Control Panel User Manual

LOCK-N-LOAD®CONTROL PANELDeluxe Control PanelItem No. 044650Standard Control PanelItem No. 044651

2TABLE OF CONTENTSWarnings...2Items in Box ...

3SETUP AND OPERATIONCONTROL PANEL SETUP (Deluxe & Standard models)1) Align wire harness with connector on back of the Control Panel. Firmly press

4COUNTER AND SLIDE DETECT SENSOR SETUP (Deluxe & Standard models)1) Verify reloading press is securely mounted to bench with two bolts. Remove th

5POWDER LEVEL CHECK SETUP (Deluxe model only)1) Place the Powder Level assembly into the powder hopper.2) Locate the wire lead for the Powder Detect

67) Place an empty case under the Powder Safeguard Die and cycle the press until resistance is met. The press should not cycle on an empty case. Remo

7NOTE: If mounting on a Dillon press, please contact Hornady at 1-800-338-3220 and request part number 399274.4) Lightly tighten the bracket down usi

1-308-382-1390 | PO Box 1848 | Grand Island, NE 68802 | hornady.comWARRANTYHornady electronic components are covered by a one-year warranty from the d